• Set up a unified URL for Geo sites
  • Configure an external URL to send traffic to both sites
  • Update the Geo sites to use the same external URL
• Limitations
• Behavior of secondary sites when the primary Geo site is down
• Features accelerated by secondary Geo sites
• Disable Geo proxying
• Geo proxying with Separate URLs

Geo proxying for secondary sites

Use Geo proxying to:

• Have secondary sites serve read-write traffic by proxying to the primary site.
• Selectively accelerate replicated data types by directing read-only operations to the local site instead.

When enabled, users of the secondary site can use the WebUI as if they were accessing the primary site’s UI. This significantly improves the overall user experience of secondary sites.

With secondary proxying, web requests to secondary Geo sites are proxied directly to the primary, and appear to act as a read-write site.

Proxying is done by the gitlab-workhorse component. Traffic usually sent to the Rails application on the Geo secondary site is proxied to the internal URL of the primary Geo site instead.

Use secondary proxying for use-cases including:

• Having all Geo sites behind a single URL.
• Geographically load-balancing traffic without worrying about write access.

For an overview, see: Secondary proxying using geographic load-balancer and AWS Route53.

Set up a unified URL for Geo sites

Secondary sites can transparently serve read-write traffic. You can use a single external URL so that requests can hit either the primary Geo site or any secondary Geo sites that use Geo proxying.

Configure an external URL to send traffic to both sites

Follow the Location-aware public URL steps to create a single URL used by all Geo sites, including the primary.

Update the Geo sites to use the same external URL

1. On your Geo sites, SSH into each node running Rails (Puma, Sidekiq, Log-Cursor) and change the external_url to that of the single URL:

   sudo editor /etc/gitlab/gitlab.rb
   

2. Reconfigure the updated nodes for the change to take effect if the URL was different than the one already set:

   gitlab-ctl reconfigure
   

3. To match the new external URL set on the secondary Geo sites, the primary database needs to reflect this change.

   In the Geo administration page of the primary site, edit each Geo secondary that is using the secondary proxying and set the URL field to the single URL. Make sure the primary site is also using this URL.

In Kubernetes, you can use the same domain under global.hosts.domain as for the primary site.

Limitations

• When secondary proxying is used, the asynchronous Geo replication can cause unexpected issues for accelerated data types that may be replicated to the Geo secondaries with a delay.

  For example, we found a potential issue where replication lag introduces read-after-write inconsistencies. If the replication lag is high enough, this can result in Git reads receiving stale data when hitting a secondary.

• Non-Rails requests are not proxied, so other services may need to use a separate, non-unified URL to ensure requests are always sent to the primary. These services include:

  • GitLab container registry - can be configured to use a separate domain.
  • GitLab Pages - should always use a separate domain, as part of the prerequisites for running GitLab Pages.

• With a unified URL, Let’s Encrypt can’t generate certificates unless it can reach both IPs through the same domain. To use TLS certificates with Let’s Encrypt, you can manually point the domain to one of the Geo sites, generate the certificate, then copy it to all other sites.

• Using Geo secondary sites to accelerate runners is experimental and is not recommended for production. It can be configured and tested by following the steps in secondary proxy runners. Progress toward general availability can be tracked in epic 9779.

• When secondary proxying is used together with separate URLs, signing in the secondary site using SAML is only supported if the SAML Identity Provider (IdP) allows an application to be configured with multiple callback URLs.

Behavior of secondary sites when the primary Geo site is down

Considering that web traffic is proxied to the primary, the behavior of the secondary sites differs when the primary site is inaccessible:

• UI and API traffic return the same errors as the primary (or fail if the primary is not accessible at all), since they are proxied.
• For repositories that are fully up-to-date on the specific secondary site being accessed, Git read operations still work as expected, including authentication through HTTP(s) or SSH. However, Git reads performed by GitLab Runners will fail.
• Git operations for repositories that are not replicated to the secondary site return the same errors as the primary site, since they are proxied.
• All Git write operations return the same errors as the primary site, since they are proxied.

Features accelerated by secondary Geo sites

Most HTTP traffic sent to a secondary Geo site can be proxied to the primary Geo site. With this architecture, secondary Geo sites are able to support write requests. Certain read requests are handled locally by secondary sites for improved latency and bandwidth nearby. All write requests are proxied to the primary site.

The following table details the components currently tested through the Geo secondary site Workhorse proxy. It does not cover all data types.

In this context, accelerated reads refer to read requests served from the secondary site, provided that the data is up to date for the component on the secondary site. If the data on the secondary site is determined to be out of date, the request is forwarded to the primary site. Read requests for components not listed in the table below are always automatically forwarded to the primary site.

Disable Geo proxying

Secondary proxying is enabled by default on a secondary site when it uses a unified URL, meaning, the same external_url as the primary site. Disabling proxying in this case tends to not be helpful due to completely different behavior being served at the same URL, depending on routing.

Secondary proxying is enabled by default in GitLab 15.1 on a secondary site even without a unified URL. If proxying needs to be disabled on a secondary site, it is much easier to disable the feature flag in Geo proxying with Separate URLs. However, if there are multiple secondary sites, then the instructions in this section can be used to disable secondary proxying per site.

Additionally, the gitlab-workhorse service polls /api/v4/geo/proxy every 10 seconds. In GitLab 15.2 and later, it is only polled once, if Geo is not enabled. Prior to GitLab 15.2, you can stop this polling by disabling secondary proxying.

You can disable the secondary proxying on each Geo site separately by following these steps on a Linux package installation:

1. SSH into each application node (serving user traffic directly) on your secondary Geo site and add the following environment variable:

   sudo editor /etc/gitlab/gitlab.rb
   

   gitlab_workhorse['env'] = {
     "GEO_SECONDARY_PROXY" => "0"
   }
   

2. Reconfigure the updated nodes for the change to take effect:

   gitlab-ctl reconfigure
   

In Kubernetes, you can use --set gitlab.webservice.extraEnv.GEO_SECONDARY_PROXY="0", or specify the following in your values file:

gitlab:
  webservice:
    extraEnv:
      GEO_SECONDARY_PROXY: "0"

Geo proxying with Separate URLs

Geo proxying for separate URLs is enabled by default from GitLab 15.1. This allows secondary sites to proxy actions to the primary site even if the URLS are different.

If you run into issues, disable the geo_secondary_proxy_separate_urls feature flag to disable the feature.

1. SSH into one node running Rails on your primary Geo site and run:

   sudo gitlab-rails runner "Feature.disable(:geo_secondary_proxy_separate_urls)"
   

2. Restart Puma on all of the nodes running Rails on your secondary Geo site:

   sudo gitlab-ctl restart puma
   

In Kubernetes, you can run the same command in the toolbox pod. Refer to the Kubernetes cheat sheet for details.