PlantUML
With the PlantUML integration, you can create diagrams in snippets, wikis, and repositories. This integration is enabled on GitLab.com for all SaaS users and does not require any additional configuration.
To set up the integration on a self-managed instance, you must configure your PlantUML server.
After completing the integration, PlantUML converts plantuml
blocks to an HTML image tag, with the source pointing to the PlantUML instance. The PlantUML
diagram delimiters @startuml
/@enduml
aren’t required, as these are replaced
by the plantuml
block:
-
Markdown files with the extension
.md
:```plantuml Bob -> Alice : hello Alice -> Bob : hi ```
For additional acceptable extensions, review the
languages.yaml
file. -
AsciiDoc files with the extension
.asciidoc
,.adoc
, or.asc
:[plantuml, format="png", id="myDiagram", width="200px"] ---- Bob->Alice : hello Alice -> Bob : hi ----
-
reStructuredText
.. plantuml:: :caption: Caption with **bold** and *italic* Bob -> Alice: hello Alice -> Bob: hi
Although you can use the
uml::
directive for compatibility withsphinxcontrib-plantuml
, GitLab supports only thecaption
option.
If the PlantUML server is correctly configured, these examples should render a diagram instead of the code block:
Inside the block you can add any of the diagrams PlantUML supports, such as:
You can add parameters to block definitions:
-
id
: A CSS ID added to the diagram HTML tag. -
width
: Width attribute added to the image tag. -
height
: Height attribute added to the image tag.
Markdown does not support any parameters, and always uses PNG format.
Configure your PlantUML server
Before you can enable PlantUML in GitLab, set up your own PlantUML server to generate the diagrams:
Docker
To run a PlantUML container in Docker, run this command:
docker run -d --name plantuml -p 8005:8080 plantuml/plantuml-server:tomcat
The PlantUML URL is the hostname of the server running the container.
When running GitLab in Docker, it must have access to the PlantUML container.
To achieve that, use Docker Compose.
In this basic docker-compose.yml
file, PlantUML is accessible to GitLab at the URL
http://plantuml:8005/
:
version: "3"
services:
gitlab:
image: 'gitlab/gitlab-ee:12.2.5-ee.0'
environment:
GITLAB_OMNIBUS_CONFIG: |
nginx['custom_gitlab_server_config'] = "location /-/plantuml/ { \n rewrite ^/-/plantuml/(.*) /$1 break;\n proxy_cache off; \n proxy_pass http://plantuml:8005/; \n}\n"
plantuml:
image: 'plantuml/plantuml-server:tomcat'
container_name: plantuml
ports:
- "8005:8080"
Configure local PlantUML access
The PlantUML server runs locally on your server, so it can’t be accessed
externally by default. Your server must catch external PlantUML
calls to https://gitlab.example.com/-/plantuml/
and redirect them to the
local PlantUML server. Depending on your setup, the URL is either of the
following:
http://plantuml:8080/
http://localhost:8080/plantuml/
http://plantuml:8005/
http://localhost:8005/plantuml/
If you’re running GitLab with TLS you must configure this redirection, because PlantUML uses the insecure HTTP protocol. Newer browsers such as Google Chrome 86+ don’t load insecure HTTP resources on pages served over HTTPS.
To enable this redirection:
-
Add the following line in
/etc/gitlab/gitlab.rb
, depending on your setup method:# Docker deployment nginx['custom_gitlab_server_config'] = "location /-/plantuml/ { \n rewrite ^/-/plantuml/(.*) /$1 break;\n proxy_cache off; \n proxy_pass http://plantuml:8005/; \n}\n"
-
To activate the changes, run the following command:
sudo gitlab-ctl reconfigure
Debian/Ubuntu
You can install and configure a PlantUML server in Debian/Ubuntu distributions using Tomcat or Jetty.
Prerequisites:
- JRE/JDK version 11 or later.
- (Recommended) Jetty version 11 or later.
- (Recommended) Tomcat version 10 or later.
Installation
PlantUML recommends to install Tomcat 10 or above. The scope of this page only includes setting up a basic Tomcat server. For more production-ready configurations, see the Tomcat Documentation.
-
Install JDK/JRE 11:
sudo apt update sudo apt-get install graphviz default-jdk git-core
-
Add a user for Tomcat:
sudo useradd -m -d /opt/tomcat -U -s /bin/false tomcat
-
Install and configure Tomcat 10:
wget https://dlcdn.apache.org/tomcat/tomcat-10/v10.1.15/bin/apache-tomcat-10.1.15.tar.gz -P /tmp sudo tar xzvf /tmp/apache-tomcat-10*tar.gz -C /opt/tomcat --strip-components=1 sudo chown -R tomcat:tomcat /opt/tomcat/ sudo chmod -R u+x /opt/tomcat/bin
-
Create a systemd service. Edit the
/etc/systemd/system/tomcat.service
file and add:[Unit] Description=Tomcat After=network.target [Service] Type=forking User=tomcat Group=tomcat Environment="JAVA_HOME=/usr/lib/jvm/java-1.11.0-openjdk-amd64" Environment="JAVA_OPTS=-Djava.security.egd=file:///dev/urandom" Environment="CATALINA_BASE=/opt/tomcat" Environment="CATALINA_HOME=/opt/tomcat" Environment="CATALINA_PID=/opt/tomcat/temp/tomcat.pid" Environment="CATALINA_OPTS=-Xms512M -Xmx1024M -server -XX:+UseParallelGC" ExecStart=/opt/tomcat/bin/startup.sh ExecStop=/opt/tomcat/bin/shutdown.sh RestartSec=10 Restart=always [Install] WantedBy=multi-user.target
JAVA_HOME
should be the same path as seen insudo update-java-alternatives -l
. -
To configure ports, edit your
/opt/tomcat/conf/server.xml
and choose your ports. Avoid using port8080
, as Puma listens on port8080
for metrics.<Server port="8006" shutdown="SHUTDOWN"> ... <Connector port="8005" protocol="HTTP/1.1" ...
-
Reload and start Tomcat:
sudo systemctl daemon-reload sudo systemctl start tomcat sudo systemctl status tomcat sudo systemctl enable tomcat
The Java process should be listening on these ports:
root@gitlab-omnibus:/plantuml-server# netstat -plnt | grep java tcp6 0 0 127.0.0.1:8006 :::* LISTEN 14935/java tcp6 0 0 :::8005 :::* LISTEN 14935/java
-
Modify your NGINX configuration in
/etc/gitlab/gitlab.rb
. Ensure theproxy_pass
port matches the Connector port inserver.xml
:nginx['custom_gitlab_server_config'] = "location /-/plantuml { rewrite ^/-/(plantuml.*) /$1 break; proxy_set_header HOST $host; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Proto $scheme; proxy_cache off; proxy_pass http://localhost:8005/plantuml; }"
-
Reconfigure GitLab to read the new changes:
sudo gitlab-ctl reconfigure
-
Install PlantUML and copy the
.war
file:Use the latest release of plantuml-jsp (example: plantuml-jsp-v1.2023.12.war). For context, see this issue.
wget -P /tmp https://github.com/plantuml/plantuml-server/releases/download/v1.2023.12/plantuml-jsp-v1.2023.12.war sudo cp /tmp/plantuml-jsp-v1.2023.12.war /opt/tomcat/webapps/plantuml.war sudo chown tomcat:tomcat /opt/tomcat/webapps/plantuml.war sudo systemctl restart tomcat
The Tomcat service should restart. After the restart is complete, the
PlantUML integration is ready and listening for requests on port 8005
:
http://localhost:8005/plantuml
To test if the PlantUML server is working, run curl --location --verbose "http://localhost:8005/plantuml/"
.
To change the Tomcat defaults, edit the /opt/tomcat/conf/server.xml
file.
404
error when opening the PlantUML page in the browser
You might get a 404
error when visiting https://gitlab.example.com/-/plantuml/
, when the PlantUML
server is set up in Debian or Ubuntu.
This can happen even when the integration is working. It does not necessarily indicate a problem with your PlantUML server or configuration.
Configure PlantUML security
PlantUML has features that allow fetching network resources. If you self-host the PlantUML server, put network controls in place to isolate it. For example, make use of PlantUML’s security profiles.
@startuml
start
' ...
!include http://localhost/
stop;
@enduml
Enable PlantUML integration
After configuring your local PlantUML server, you’re ready to enable the PlantUML integration:
- Sign in to GitLab as an Administrator user.
- On the left sidebar, at the bottom, select Admin Area.
- On the left sidebar, go to Settings > General and expand the PlantUML section.
- Select the Enable PlantUML checkbox.
- Set the PlantUML instance as
https://gitlab.example.com/-/plantuml/
, and select Save changes.
Depending on your PlantUML and GitLab version numbers, you may also need to take these steps:
-
For PlantUML servers running v1.2020.9 and later, such as plantuml.com, you must set the
PLANTUML_ENCODING
environment variable to enable thedeflate
compression. In Linux package installations, you can set this value in/etc/gitlab/gitlab.rb
with this command:gitlab_rails['env'] = { 'PLANTUML_ENCODING' => 'deflate' }
In GitLab Helm chart, you can set it by adding a variable to the global.extraEnv section, like this:
global: extraEnv: PLANTUML_ENCODING: deflate
-
deflate
is the default encoding type for PlantUML. To use a different encoding type, PlantUML integration requires a header prefix in the URL to distinguish different encoding types.