GitLab Container Registry
- Enable the Container Registry for your project
- Build and push images
- Use images from GitLab Container Registry
- Control Container Registry from within GitLab
- Build and push images using GitLab CI
- Using with private projects
- Troubleshooting the GitLab Container Registry
Notes: Introduced in GitLab 8.8.
- Docker Registry manifest
v1support was added in GitLab 8.9 to support Docker versions earlier than 1.10.
- This document is about the user guide. To learn how to enable GitLab Container Registry across your GitLab instance, visit the administrator documentation.
- Starting from GitLab 8.12, if you have 2FA enabled in your account, you need to pass a personal access token instead of your password in order to login to GitLab's Container Registry.
- Multiple level image names support was added in GitLab 9.1
With the Docker Container Registry integrated into GitLab, every project can have its own space to store its Docker images.
You can read more about Docker Registry at https://docs.docker.com/registry/introduction/.
First, ask your system administrator to enable GitLab Container Registry following the administration documentation. If you are using GitLab.com, this is enabled by default so you can start using the Registry immediately.
Go to your project's settings and enable the Container Registry feature on your project. For new projects this might be enabled by default. For existing projects (prior GitLab 8.8), you will have to explicitly enable it.
Hit Save changes for the changes to take effect. You should now be able to see the Registry link in the project menu.
- Moving or renaming existing container registry repositories is not supported once you have pushed images because the images are signed, and the signature includes the repository name.
- To move or rename a repository with a container registry you will have to delete all existing images.
If you visit the Registry link under your project's menu, you can see the explicit instructions to login to the Container Registry using your GitLab credentials.
For example if the Registry's URL is
registry.example.com, the you should be
able to login with:
docker login registry.example.com
Building and publishing images should be a straightforward process. Just make sure that you are using the Registry URL with the namespace and project name that is hosted on GitLab:
docker build -t registry.example.com/group/project/image . docker push registry.example.com/group/project/image
Your image will be named after the following scheme:
GitLab supports up to three levels of image repository names.
Following examples of image tags are valid:
registry.example.com/group/project:some-tag registry.example.com/group/project/image:latest registry.example.com/group/project/my/image:rc1
To download and run a container from images hosted in GitLab Container Registry,
docker run [options] registry.example.com/group/project/image [arguments]
For more information on running Docker containers, visit the Docker documentation.
GitLab offers a simple Container Registry management panel. Go to your project and click Registry in the project menu.
This view will show you all tags in your project and will easily allow you to delete them.
Note: This feature requires GitLab 8.8 and GitLab Runner 1.2.
Introduced in GitLab 9.3.
If a project is private, credentials will need to be provided for authorization.
The preferred way to do this, is by using personal access tokens.
The minimal scope needed is
Check to make sure that the system clock on your Docker client and GitLab server have been synchronized (e.g. via NTP).
If you are using an S3-backed Registry, double check that the IAM permissions and the S3 credentials (including region) are correct. See the sample IAM policy for more details.
Check the Registry logs (e.g.
/var/log/gitlab/registry/current) and the GitLab production logs for errors (e.g.
/var/log/gitlab/gitlab-rails/production.log). You may be able to find clues there.
NOTE: The following section is only recommended for experts.
Sometimes it's not obvious what is wrong, and you may need to dive deeper into the communication between the Docker client and the Registry to find out what's wrong. We will use a concrete example in the past to illustrate how to diagnose a problem with the S3 setup.
A user attempted to enable an S3-backed Registry. The
docker login step went
fine. However, when pushing an image, the output showed:
The push refers to a repository [s3-testing.myregistry.com:4567/root/docker-test/docker-image] dc5e59c14160: Pushing [==================================================>] 14.85 kB 03c20c1a019a: Pushing [==================================================>] 2.048 kB a08f14ef632e: Pushing [==================================================>] 2.048 kB 228950524c88: Pushing 2.048 kB 6a8ecde4cc03: Pushing [==> ] 9.901 MB/205.7 MB 5f70bf18a086: Pushing 1.024 kB 737f40e80b7f: Waiting 82b57dbc5385: Waiting 19429b698a22: Waiting 9436069b92a3: Waiting error parsing HTTP 403 response body: unexpected end of JSON input: ""
This error is ambiguous, as it's not clear whether the 403 is coming from the GitLab Rails application, the Docker Registry, or something else. In this case, since we know that since the login succeeded, we probably need to look at the communication between the client and the Registry.
The REST API between the Docker client and Registry is described here. Normally, one would just use Wireshark or tcpdump to capture the traffic and see where things went wrong. However, since all communication between Docker clients and servers are done over HTTPS, it's a bit difficult to decrypt the traffic quickly even if you know the private key. What can we do instead?
One way would be to disable HTTPS by setting up an insecure Registry. This could introduce a security hole and is only recommended for local testing. If you have a production system and can't or don't want to do this, there is another way: use mitmproxy, which stands for Man-in-the-Middle Proxy.
mitmproxy allows you to place a proxy between your client and server to inspect all traffic. One wrinkle is that your system needs to trust the mitmproxy SSL certificates for this to work.
The following installation instructions assume you are running Ubuntu:
- Install mitmproxy (see http://docs.mitmproxy.org/en/stable/install.html)
mitmproxy --port 9000to generate its certificates. Enter CTRL-C to quit.
Install the certificate from
~/.mitmproxyto your system:
sudo cp ~/.mitmproxy/mitmproxy-ca-cert.pem /usr/local/share/ca-certificates/mitmproxy-ca-cert.crt sudo update-ca-certificates
If successful, the output should indicate that a certificate was added:
Updating certificates in /etc/ssl/certs... 1 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d....done.
To verify that the certificates are properly installed, run:
mitmproxy --port 9000
This will run mitmproxy on port
9000. In another window, run:
curl --proxy http://localhost:9000 https://httpbin.org/status/200
If everything is setup correctly, you will see information on the mitmproxy window and no errors from the curl commands.
For Docker to connect through a proxy, you must start the Docker daemon with the
proper environment variables. The easiest way is to shutdown Docker (e.g.
sudo initctl stop docker)
and then run Docker by hand. As root, run:
export HTTP_PROXY="http://localhost:9000" export HTTPS_PROXY="https://localhost:9000" docker daemon --debug
This will launch the Docker daemon and proxy all connections through mitmproxy.
Now that we have mitmproxy and Docker running, we can attempt to login and push a container image. You may need to run as root to do this. For example:
docker login s3-testing.myregistry.com:4567 docker push s3-testing.myregistry.com:4567/root/docker-test/docker-image
In the example above, we see the following trace on the mitmproxy window:
The above image shows:
- The initial PUT requests went through fine with a 201 status code.
- The 201 redirected the client to the S3 bucket.
- The HEAD request to the AWS bucket reported a 403 Unauthorized.
What does this mean? This strongly suggests that the S3 user does not have the right permissions to perform a HEAD request. The solution: check the IAM permissions again. Once the right permissions were set, the error will go away.